research report
Archives: Research Products
published journal article
Obstacles to regional housing solutions: A comparison of four metropolitan areas
Journal of Urban Affairs
Publication Date
Author(s)
Suggested Citation
Victoria Basolo and Dorian Hastings (2003) “Obstacles to regional housing solutions: A comparison of four metropolitan areas”, Journal of Urban Affairs, 25(4), pp. 449–472. Available at: 10.1111/1467-9906.00172.working paper
Impacts of Left Lane Truck Restriction on Urban Freeways
Publication Date
Author(s)
Abstract
This paper examines the impacts of truck lane restriction on urban freeways using traffic simulation models. The study includes three main parts: Part (1) provides insights into conditions under which truck lane restrictions would work well; Part (2) identifies the best number of lanes to restrict and shows that this is an important factor in the success of lane restriction; Part (3) investigates potential impacts of truck lane restriction through a case study using a region with some of the highest truck volumes in the U.S., the I-710 corridor in Los Angeles County, California. The study begins by examining the potential impacts of truck lane restrictions using two representative hypothetical freeways. This is because the impacts of truck lane restrictions will vary with differing traffic and geometric conditions. Results suggest that truck lane restriction could work well when the rate of flow is more than 1300 vehicles per hour per lane and where trucks make up at least 10 percent of the total traffic. Three scenarios are developed. These are do-nothing (no strategy implemented), alternative I (the one leftmost lane restricted from trucks), and alternative II (the two leftmost lanes restricted from trucks). These are examined in a pair-wise manner. Results show that determining the best number of restricted lanes is very important. Through the I-710 case study we find that alternative II would have the most positive effects on traffic congestion and travel time variance. Based on these results, we conclude that truck lane restriction strategies, which are very simple and cost-effective to implement, may contribute to improved traffic flow on urban freeways.
Phd Dissertation
Impacts of Capacity Drop on Freeway Control
Publication Date
Author(s)
Areas of Expertise
Abstract
An unfortunate feature of freeway traffic flow at merge bottlenecks is the capacity drop (CD) phenomenon. It refers to a drop in the bottleneck outflow when a queue forms upstream to that bottleneck compared to the outflow observed before the formation of the queue. While its causes and exact mechanism are still open questions, this research concerns in the impacts of CD and how to mitigate them.The distinct features of CD in a freeway corridor are assessed based on the behavior of equilibrium states in a model capable of replicating CD. The impacts are unveiled by comparing the system properties with and without the CD. The main finding is that the highest outflow occurs under uncongested equilibrium; however, it may not be reachable depending on the demands and initial conditions.The local ramp metering control is investigated into more details. CD imposes a hysteresis on the system response with respect to the demand level. Also, we analyze the system in closed loop considering ALINEA, a well-known control algorithm. We establish the stability range with respect to parameters which is a necessary requirement for the controller to be effective. Further, we propose an extension of ALINEA to enlarge the stability range mitigating a performance loss that occurs when the on-ramp and the bottleneck are far apart.Essential aspects of ramp metering are better captured with microscopic models; however, there were few evidences that such models can replicates CD. To that end, we propose a parameter calibration procedure that ensures the underlying model properly captures CD. The approach is tested with loop detector data from a merge bottleneck in which the CD is consistently observed. All results with different approaches point to the direction that the existence of CD imposes additional challenges on the system control. Fortunately, in most cases the effects of CD can be mitigated with a properly designed control strategy, such as the ones tested and proposed in this research.
Suggested Citation
Felipe Augusto de Souza (2018) Impacts of Capacity Drop on Freeway Control. Ph.D.. UC Irvine. Available at: https://escholarship.org/uc/item/06g0c6bn (Accessed: October 12, 2023).working paper
Structural Equation Modeling of Travel Choice Dynamics
Publication Date
Associated Project
Author(s)
Abstract
This research has two objectives. The first objective is to explore the use of the modeling tool called “latent structural equations” (structural equations with latent variables) in the general field of travel behavior analysis and the more specific field of dynamic analysis of travel behavior. The second objective is to apply a latent structural equation model in order to determine the causal relationships between income, car ownership, and mobility.Many transportation researchers might be unfamiliar with latent structural equation modeling, which is also known as “latent structural analysis,” “causal analysis,” and “soft modeling.” However, most researchers will be quite familiar with techniques that are special cases of latent structural equations: e.g., conventional multiple regression and simultaneous equations, path analysis, and (confirmatory) factor analysis. Furthermore, recent advances in estimation techniques have made it possible to incorporate discrete choice variables and other non-normal variables in structural equations models. Thus, probit choice models (binomial, ordered, and multinomial) can be incorporated within the general model framework.The empirical analysis reported here involves dynamic travel demand data from the Dutch National Mobility Panel for the three years 1984 through 1986. All variables in the model, with the exception of income level in the first year, are endogenous: income is treated as an ordinal (four category) variable; car ownership is treated as either an ordinal (ordered probit) or a categorical (multinomial probit) choice variable; and mobility, in terms of car trips and public transport trips, is treated as two censored (tobit) continuous variables. The model fits the data well, but only scratches the surface of the potential of latent structural equation modeling with panel data. Some possible extensions are outlined.The methodological discussion is not intended as a comprehensive overview of structural equation modeling with latent variables. Rather, the aim is to explore the technique in comparison to conventional methods of travel behavior analysis. Many extensive overviews are available, due to the popularity of the technique in the fields of sociology and psychology, and more recently in marketing research. The technique as described here has been in use since the early 1970s, but, because of recent rapid developments, current overviews are more relevant to transportation researchers. Such overviews are provided by Bentler (1980), Bentler and Weeks (1985), Fornell and Larcker (1981), Hayduk (1987), and Joreskog and Wold (1982), among others. In particular, Hayduk (1897) provides an extensive bibliography. Historical developments are reviewed in Bentler (1986) and Bielby and Hauser (1977).The author is aware of three computer programs for latent structural equation modeling: LISREL (Joreskog and Sorbom, 1984; 1987), EQS (Bentler, 1985), and LISCOMP (Muthen, 1987). Each program is based on a different approach to estimation and testing and each has its advantages and disadvantages. The three approaches are briefly reviewed in Section 6 on estimation methods. The application results presented here were obtained using the LISCOMP program. It is also possible to replicate the approaches of these programs by implementing several separate estimation procedures (e.g., maximum likelihood estimations of probit models and tobit models, and generalized least square and maximum likelihood estimations of siumultaneous equations) in sequential and recursive order, but this is inefficient in view of the available comprehensive packages.
Suggested Citation
Thomas F. Golob (1988) Structural Equation Modeling of Travel Choice Dynamics. Working Paper UCTC No. 4. Institute of Transportation Studies, Irvine. Available at: https://escholarship.org/uc/item/2kj325qv.book/book chapter
Technological innovation and intelligent transportation systems for the US
Publication Date
Author(s)
Suggested Citation
Stephen Ritchie, Craig Rindt and Dean Deeter (2019) “Technological innovation and intelligent transportation systems for the US”, in US infrastructure. Routledge, pp. 37–54. Available at: https://doi.org/10.4324/9781351007023-3.published journal article
Knowledge-based approach to pavement overlay design
Transportation Research Record
Publication Date
Author(s)
Suggested Citation
Stephen G. Ritchie (1987) “Knowledge-based approach to pavement overlay design”, Transportation Research Record, (1145), pp. 61–68.book/book chapter
Historical pollution and criminal liability in the united states
Publication Date
Author(s)
Suggested Citation
Joseph F.C. DiMento and Ava Badiee (2017) “Historical pollution and criminal liability in the united states”, in Historical pollution. Springer International Publishing, pp. 197–223. Available at: https://doi.org/10.1007/978-3-319-56937-6_8.published journal article
An activity-based assessment of the potential impacts of plug-in hybrid electric vehicles on energy and emissions using 1-day travel data
Transportation Research Part D: Transport and Environment
Publication Date
Associated Projects
- An Activity-Based Assessment of the Potential Impacts of Plug-in Hybrid Electronic Vehicles (PHEV’s) on Energy: Emissions Using One-day Travel Data
- An Activity-Based Assessment of Bounds of Alternative Fuel Vehicles & Infrastructure
- An Activity-Based Assessment of the Bounds of Sustainable Alternative Transportation Futures
Author(s)
Abstract
This paper assesses the potential energy profile impacts of plug-in hybrid electric vehicles and estimates gasoline and electricity demand impacts for California of their adoption. The results are based on simulations replicating vehicle usage patterns reported in 1-day activity and travel diaries based on the 2000–2001 California Statewide Household Travel Survey. Four charging scenarios are examined. We find that circuit upgrades to 240 V not only bring faster charging times but also reduce charging time differences between PHEV20 and PHEV60; home charging can potentially service 40–50% of travel distances with electric power for PHEV20 and 70–80% for PHEV60; equipping public parking spaces with charging facilities, can potentially convert 60–70% of mileage from fuel to electricity for PHEV20, and 80–90% for PHEV60; and afternoons are found to be exposed to a higher level of emissions.
Suggested Citation
Jee E. Kang and W.W. Recker (2009) “An activity-based assessment of the potential impacts of plug-in hybrid electric vehicles on energy and emissions using 1-day travel data”, Transportation Research Part D: Transport and Environment, 14(8), pp. 541–556. Available at: 10.1016/j.trd.2009.07.012.book/book chapter